Welcome

Welcome to my blog, random stuff about me and where I live, plus some bits about my jewellery.

Ley Holloway is a participant in the Amazon EU Associates Programme, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk
Showing posts with label beads. Show all posts
Showing posts with label beads. Show all posts

Wednesday, 1 March 2017

Finished Moonlit Water pendant

I've been working on a little piece which I've called either Moon Water or Moonlit Water, although I think I might have used the second version for a much earlier piece.
The piece uses white sea glass and silvery and white beads, both vintage and modern. I frequently use silver wire torcs to hang these pendants but I decided that this time I would make a beaded necklace.
(For people who think I've misspelled torc, that's the right spelling, torque has something to do with engines, sorry bit of a pet hate of mine)


This is very unusual for me, I actually drew a design for this piece, it's even turned out not too far from this!


Here's a very early stage of the piece, fixing the sea glass to a backing with rows of hand stitched beads.


This is the pendant finished, slightly out of focus sadly.

I've recently started using metals, fusing them together. So I decided to make a fastener for this piece out of silver wire.



The clasp is a T Bar style with a loop which the T bar fits through. It's made by twisting wire round itself and then fusing it with a blow torch. This wire was quite fine so I had to be careful not to just melt it. After cleaning the fused wire is hammered flat, this makes it much harder, work hardened.
In the top image you can see the mini anvil I use to hammer the shapes with a small modellers hammer.


Here's the finished piece on my work mat. I've added some embellishments to the simple beaded necklace, partly because it felt like it needed something, and also so that the pendant will sit with it's clasp visible at the side rather than at the back as usual. After all if it's such a nice fastener why hide it?
There are a some tiny baroque pearls in this piece which I found on an antique/junk stall, it's a great multi strand necklace so lots of pearls available.

Friday, 10 February 2017

Update on the jewellery front.

I've been shamefully neglecting this blog recently, so here's a general catch up on what I've been up to with my jewellery and stuff.

I still haven't finished the big sea inspired piece with the lace, it's a lot further on but still not finished.

This is the stage it's at now, I may have to adjust the lace a little in order for the piece to hang correctly when worn. We'll see when the other half of the actual necklace is made

I've been playing with copper and silver recently, fusing the silver onto copper shapes with a blow torch.






All of these will be in my Folksy shop if you're interested, a couple already are, follow the links.

This stuff is huge fun to make but very unpredictable. It involves blasting the silver with a blow torch until it looks shiny and starts to run. You have to take it through that cherry red stage and out the other side. The trick is to catch it just at that point where it still looks like a piece of silver rather than a puddle, but melts enough to fuse to the copper. I'm getting better at it but it still plays up sometimes.

The third one down is interesting because it's using a failed silver clay piece. I made some moulds from very fragile shells and tried to recreate them in silver clay, all but one broke when I tried to polish them so I tried using one of the failures this way, very pleased that it worked.
I buy the copper shapes, they are incredibly cheap so why bother making them?
Fine, or pure silver works more easily but it's more inclined to disappear into a puddle too.

Most of this year has been taken up with decorating, or rather renovating, my living room. More about that in another post perhaps.

Wednesday, 1 July 2015

Revisiting a piece of jewellery started ages ago

I believe I may have written about my plans for a blue and white ceramic piece quite some time ago. I've recently started working on it again and have got to the stage of attaching some vintage lace to one side of it.
This is the stage it got to before being put aside for months, I've taken it much further now, it's not been planned on paper, as most of my stuff isn't, but there's a definite image in my head of what I want it to be.

Here it is with all the beading finished, the problem with these 'plate' pieces is the amount of time it takes to attach the beads so that none of the backing shows anywhere. You can tell that it's been sitting around for a while in the first picture, as something has stained the backing! Not sure what but luckily it gets totally hidden in the finished piece.


In this picture you can see the edge row, this hides the join between the original backing and the leather which covers it and hides the tangled spiders web of stitches that hold all those beads in place. The lace behind it was my first idea for what to use I've sinced added another layer of different lace to go under it.





the underlayer of lace is attached to one edge of the piece, the other piece of lace will go on top and the two will be gathered and ruched and beaded within an inch of their lives. I want an effect of surf, or at least a suggestion of that, the ceramic pieces and the beads are the waves you see. I know what I mean anyway.


Here is where it is at now. Totally ungramatical sentence I know but I'm tired and it says what I mean sort of. Hopefully you can see the beginnings of the ruching. The two pieces are joined along the long edges of the top piece, both are attached to the ceramic 'plate'. Eventually there will be bead weaving extending from the end of the lower lace piece to form one side of a necklace. The other side will be all beading, but I expect I'll throw some wierdness in there, holes and twists, that sort of thing.

Watch this space. 

As an after thought I recently altered a piece I made a few years ago, which I was never happy with, I realised that it didn't hang right because it was too long. Now any one who does bead weaving will know how hard it is to take it apart, especially if you only want to take a little bit apart and leave the rest intact, well I finally got the time and the nerve to tackle it and I'm much happier with it now.


 The bottom picture show my much younger neighbour modelling the original, the other two are me showing it shortened, it looks much better on Caz but I still think it looks better shorter.

another 'plate' piece, I call it River.







Tuesday, 27 May 2014

Shed Destruction

This weekend instead of having a lazy time and enjoying the sun on Monday I spent the time taking down an old shed.

As you can see this was not an easy job. This is the shed after I emptied all the stuff out. The back wall was completely rotted along with most of one half of the roof, the ivy was holding it up I think. In fact once I got inside I found a large ivy stem literally holding up one piece.

This shed was standing up when we bought the house but had a piece of felt missing from it's roof. There was a roll of felt inside it but somehow it never got fixed with the result you can see.

Inside of the shed, there's what's left of a trestle table leaning against the remains of the back wall.

Now in that state you'd think taking it down would be easy, yes?

Oh no!

Having dug out all the rusty old tools left by my ex in this wreck, a bowl of tiles, buried under a ton of muck and rotten vegetation. 4 bikes, a bike rack, lawnmower, two strimmers, a dehumidifier etc etc. Took me most of Sunday to empty it out, fighting the ivy tendrils for posession of the stuff. There was also a drafting table which, amazingly, is still ok! Will need some major woodworm treatment pretty soon to protect the house.

A previous owner must have been a plumber or something I think, as there is a lot of old copper piping, what appears to be welding rods and some kind of tool which looks like it might pass a current across the prongs at it's end.

This is the good side of the shed, but you can see at the corner where it's started to fall down, or so I thought............

Those three windows you see there,  I thought I could save the glass, good idea. Having chipped away cement hard putty from the outside, I went inside to prize them loose from the frames. Well, they are now a pile of fragments!

With a crowbar, a heavy hammer a saw and a rubber mallet I attacked the shed. It took all day to get the ivy off the roof, and remove the roof itself.

With a lot of effort I had prized the corner loose by about 1/4 inch and was standing looking hopeless when a neighbour came by and asked how I was getting on.

I told him it was hopeless and I had no idea what to do next.

Stand back says our hero and proceeded to kick it with his big gardening boots. No effect except a little gentle rocking.

Well after some judicious work with a large sledge hammer here's what's left of it:






Plus a wheelie bin full of felt, nackered tools, really rotten wood and a bag of dried cement etc.

These sorts of jobs make being alone so much harder. This could be actually fun if done with a partner and good humour, done alone it's depressing, miserable and utterly exhausting, plus I hate spiders!
There are a lot of homeless invertebrates in my garden now.
There were hundreds of empty snail shells, lots of them jammed in the gap between the two roof beams, if I could have got to the camera when I took the roof down the sunlight through these shells was lovely but I was stuck there and they fell out before I could get it.

I now have three bikes to get rid off, rusty and looking rough, with probably seized chains from being shoved in this damp relic for so long. Plus the carrier for a car and some roof bars.

One amazing thing; the box of ceramic floor tiles the ex foolishly trusted to a shelf on the wall of such a rotten building, had all survived their fall unbroken, this may have a lot to do with the levels of leaf litter and ivy that cushioned their fall!

Well all I have to do now is dispose of the remains, easier said than done without a car, still one thing at a time eh.

The antidote to all this filthy hard work, I've been working on this piece of jewellery. I haven't done much with netting stitches lately. Should be pretty hopefully.





Friday, 18 October 2013

Re-started Work

After 18 months of total meltdown, having been put in a position I've never been in before, I've finally persuaded myself to do some work.
I've restarted work on the blue and white piece.

It's started slowly but I'm getting back to normal .

Saturday, 27 July 2013

Wedding Jewellery

I've made a few pieces over the last couple of years using vintage lace, for a while some of them were in a local gallery but they didn't sell so I had them back here. When I was looking through the stuff for something for a wedding showcase with UK Handmade I came across them again. I realised that I hadn't taken photos of some of them.
I have taken a series of pictures, including some on a mannequin head I bought recently.

I have a fairly large collection of vintage lace so I plan to make some more, I've also been collecting old and broken jewellery to use as focal points with the lace and beads.







This piece has a floral diamante brooch as it's focal point and is made on a fairly narrow piece of simple lace.






This one has a circular diamante buckle at the centre, and is made on the same simple narrow lace as the previous piece, there are five short strands of beads hanging below the buckle ending in vintage crystal beads, four small flat conical ones and a faceted teardrop, this bead came from a 1960s dress that belonged to my mother.






This piece uses a more fancy piece of lace, the lower edge is scalloped and it is made on a fine mesh, the focal piece is possibly an old brooch, or maybe part of a necklace, it consists of three large white stones in a slightly curved setting, the setting is probably brass.

All the pieces have bead woven ends to finish them and create the fastenings.

They would all make really lovely wedding jewellery, they also look great with a summery T shirt.

Monday, 27 May 2013

This my entry in the Creative Connections Monthly Craft Challenge, it's called Waterfall but I was going to call it rain so I hope you won't mind me putting it into the 'weather' challenge.
http://www.getcraftywithcc.blogspot.co.uk/2013/05/get-crafty-with-creative-connections.html
This one's not actually for sale any where at the moment but I'll probably put it on Wow Thank You soon. Or contact me with an offer?

Tuesday, 14 August 2012

A little further on with the Willow Pattern

Here's a couple of tiny steps forward, two rows of stitching on the largest piece of one of my planned sets using fragments of ceramic.




The two rows of beading consist of a 'lift row' of slightly larger beads, since the ceramic has a square edge and is reasonably thick, this row is necessary to get the beads up to a level where they begin to cover the edge of the piece and create a mount. This technique is really designed for cabochons, when the lift row is not needed. Both these rows are vintage beads, the blue beads come from a beaded collar in white, orange and blue, it was damaged so I felt justified in taking it apart. You can see the beads in the background above. the white beads may have come from a similar collar in all white beads but I have rather a lot of opaque white beads so I'm not certain these are the ones from the collar.



This is the collar, partly taken apart, seems a shame but it was already damaged.


Well that's all I've had time for yet, my life is a little complicated at the moment so I fit beading in where I can. Check back later for further developments

Sunday, 18 March 2012

Recent work

I thought it was time to put something new on here so here are a few pics of some recent pieces I've made.


This one uses an old brooch with lovely crystal stones and a length of vintage lace. The edges have a mixture of vintage and modern beads, including some gorgeous, french cut steel, 1920s ones and then the lace is wound with more beads. The necklace is finished with lengths of brick stitch weaving and fastened with a vintage mother of pearl button.


Gift Wrapped and Georgeous boutique

I'm very proud of this one, it's one of the few pieces that was properly planned, and as a result took much longer to make than usual! Took it apart several times. It mostly consists of brick stitch using modern Japanese beads and including some larger vintage beads. It was all worth it though, as it has been selected to go into a new book called 'Showcase 500 beaded jewellery' (probably spelled jewelry I expect, american book!) which is published in August. Absolutely amazed and excited about that.


Here's another one that took a long while to make, not because of actual making time but because I put it aside for ages because I couldn't decide how to make the necklace part. Finally finished it and I'm quite pleased. I haven't done one of these 'plate' style pieces for a while, lots of small pieces of glass surrounded by bead embroidery, rather than just one piece in a beaded mount. I think I should do more.

Currently working on a 3d piece, it will hopefully be a Little Owl made with beads and lace, taking a while to work out the right technique. I've made his eyes, quite pleased with them, but I can't get beyond the calico base at the moment, I think I've got a good shape now, just have to be brave and start working.


Here are the eyes, it's obviously going to be a long job! I just need to avoid kitsch or naffness, easy really.


Tuesday, 22 February 2011

Exciting day in Ilfracombe

For the first time in what seems like ages my other half and I went for a walk on Sunday afternoon, it's either been raining, we've been too busy or something. We went for a blustery stroll on Wilder Beach, I picked up a few bits of glass and Jay found me a lovely lump of willow pattern ceramic I can't wait to start working with. We felt that just mooching around on our tiny beach didn't really constitute a walk so we set off for the harbour.





As we got to the railings overlooking the outside of the harbour I saw something just disappearing under the water, I thought it was a gannet fishing and then it reappeared.......A little curved triangular fin on a smooth grey back a dolphin! We walked out to the end of the harbour wall and scanned the heaving water, there were two at least, all we saw were their backs surfacing occasionally as they came up for air, these were dolphins fishing, not playing unfortunately but still very exciting. We watched for ages and I managed to catch a tiny glimpse on film. You need good eysight to spot the tiny black speck appear and disappear, they really weren't performing for their public that day.


You really have to watch carefully to spot the dolphin's back appearing and disappearing briefly twice at the left hand side.

On the craft front, I've been making some paisley brooches recently, these were the first things I made when I started beading. I needed to find something tomake for a little workshop I've been asked to do. I remembered this design and decided to use it. I'm kind of hooked at the moment.

 These are a few, the big one is completely over the top, but the bead in the middle sort of asked for it really.

Friday, 7 January 2011

Going back to some old designs, maybe.

For a recent, disastrous, craft fair, I unearthed some experiments that I made using polymer clay. They had been put away for a couple of years as I wasn't very happy with them. I re-strung them on ribbon rather than beads, which seemed to work well, and used a hand made T-bar clasp for one of them. I'm actually quite pleased with the results, I'd love some feedback as I think I might go back to making some of this stuff. Maybe make some beads?



This is probably my favourite piece, it's called carnival. There are layers of very thinly sliced canes and simple colours, mostly mixed with translucent clay so that they show through each other. It has a sterling silver wire bail, which is 'screwed' into the pendant by making zig zag bends in the wire and literally winding it into a hole in the pendant. This was the reason I hadn't tried to sell it as the original wire, baked into the pendant, had pulled loose. I think fitting it after the clay is baked works better in fact.

This one has needed a bit of polishing and refinishing as I think I actually over cooked it a bit, I rather like the slightly gothic look. I don't have a specific name, other than red and black heart, again it's layered slices on a red heart with a silver bail, this time just a simple loop.






This is a technique that simulates ivory. several alternating layers of white and translucent clay. The design is 'engraved' into the soft clay and then acrylic paint is rubbed into the design after baking. It has two small loops of silver wire in the top, and another at the bottom with a vintage silver heart suspended from it. The cord is hand woven from old silk thread using a medieval technique which takes FOREVER. I probably won't make any more of these cords, except for fun, as it's totally not viable to charge for the time!







This one is a large bead, about 3/4" across, using sliced canes again. The blue ribbon is quite long, probably about 30", to make a 'flapper' length pendant. The fastener is a T-bar style made from twisted silver wire, heated to fuse it and then hammered to flatten it a little

Anyway, let me know what you think, should I go back to making some of these? I'd quite like to experiment with some of the metallic powders and liquid clays that have appeared since I first started using it. I'd also like to get better at canework, although it's a bit too much planning for me, my working style is definitely organic, otherwise known as making it up as you go along!

Saturday, 14 August 2010

Competition win from Zibbet

I recently entered a competition on the Zibbet site, in return for promoting the site on my facebook page I was entered in a draw and won 3rd prize, which was $25.00 to spend on the site. In fact it was $25.00 paid into my paypal account, so technically I didn't have to spend it on Zibbet. Of course I would have felt terrible if I hadn't, so I had great fun browsing around. I eventually chose some great vintage beads to add to my stash and a hemp and copper bead bracelet.



Check out the shops I bought them from and have a look at the rest of Zibbet while you're there, if you're a craftsperson you can sell there completely for free.

Ley Holloway's Fan Box

Ley Holloway on Facebook